Drivetrain

347 Stroker motor professionally built by Ford Performance Solutions of Anaheim, CA.

CNC Ported Avenger cylinder heads, HPR Hurricane aluminum single plane intake manifold, Barry Grant 750 CFM Speed Demon Carburetor, forged steel crank, 4032 forged alloy pistons, 4340 full floating Forged H-Beam rods with APR bolts, PPP main stud Girdle with APR studs, 10.5:1 compression, FFR 4-into-1 exhaust header into FFR ceramic coated sidepipes, Quality Roadsters Canton 8 1/2 quart road race oil pan, Pure Power Lifetime oil filter (duplex woven T-304 stainless filtering element inside a 6061 T6 billet aluminum housing with Viton o-rings), March 3-point billet pulleys and brackets, 95 amp 3G alternator, electronic distributor with MSD- 6AL electronic ignition control box, aluminum radiator with adjustable temperature controlled fan with toggle controlled manual override switch.  High torque mini starter installed.

Tremec TKO 600 5 speed transmission with 0.82 overdrive, Ford Racing Performance Parts clutch, billet “detent” style firewall adjuster and billet clutch quadrant.

Cobra R style chrome wheels with 245/40-ZR17 front and 275/40-ZR17 Cooper Zeon 2XS high performance tires.  FFR tubular, adjustable upper and tubular lower control arms with coil over shocks in front, Ford Quadralink rear suspension with a Ford 8.8 inch posi-traction rear with 2.73 gears.

Body and Cosmetic

House of Kolors Kandy Apple Red (4 coats) over black base (body) and white (ghost stripes) topped with 6 coats of HOK Klear color sanded and polished to a rich deep finish.  (3 coats applied then sanded and final 3 coats applied and finish sanded).  Fit and finish is top notch.  Autometer vintage gauge set mounted in competition pattern with reverse running speedometer.  Custom center console with small storage area and location to install a radio and painted to match the body with the ghost stripes.  Master electrical safety switch mounted on rear bulkhead behind the console.  Two 12 volt accessory outlets and two multiple LED foot box lights installed with another multiple LED light in the trunk.  Hood is mounted on FFR hinge with gas shocks.  Valve covers and air cleaner painted body color and a custom, polished aluminum splash pan installed to prevent stones and debris getting into the engine compartment.  Back up light installed under rear license plate.  4 point Simpson competition style safety harnesses.  Chrome plated single roll ball (drivers side) is attached with Tangent Technologies wedge lock system which eliminates drilling and mounting a bolt through the top center mount of the roll bar.  Custom nade to order snapless tonneau cover.  Enlarged foot boxes, driver side is widened and passenger side is custom made to be as large as possible.  Fan powered fresh air vents run to each foot box.  Battery is mounted in the rear under the trunk with external battery posts located in the trunk.  1 gauge battery cable run to the starter.  Frame is powder coated gloss black.  All visible aluminum panels are professional prepped, primed and painted a gloss black, even the underside panels facing the road.  Billet dress up pieces includes shifter ring, windshield brackets and safety harness rings.